VT02/18/2.5C_54_VC1
Up to
VT24/18/2.5C_54_VC1
|
Triple pole incomer.
2-24 no. triple pole outgoing ways.
18 mm outgoing terminal centres.
250A.
C for clamp fixing. VC1 outgoing terminal.
Longer units may be available on request
Dimensions of VTxx/18/2.5 see here
|
Triple pole 25 mm outgoing centres |
|
VT02/25/2.5Y
Up to
VT18/25/2.5Y |
Triple pole incomer.
4-18 no. triple pole outgoing ways.
25 mm outgoing terminal centres.
250A.
Suffix use Y=C for clamp fixing, F for fork, H for hole fixing to outgoing device.
Available to accomodate device of frame size up to 75.5 mm, 77 mm or 81 mm.
Longer units may be available on request.
Dimensions of 81 mm see here
Dimensions of 77 mm see here
Dimensions of 75.5 mm see here
|
Triple pole 30 mm outgoing centres |
|
VT02/30/2.5Y
UP to
VT16/30/2.5Y |
Triple pole incomer.
2-16 no. triple pole outgoing ways.
30 mm outgoing terminal centres.
250A.
Suffix use Y=C for clamp fixing, F for fork, H for hole fixing to outgoing device. Accomodates device of frame size up to 91 mm. Up to 95 mm width may be available.
Longer units may be available on request.
Dimensions of VTxx/30/2.5 see here |
Triple pole 35 mm outgoing centres |
|
VT02/35/2.5Y
Up to
VT16/35/2.5Y
|
Triple pole incomer.
2-16 no. triple pole outgoing ways.
35 mm outgoing terminal centres.
250A.
Suffix use Y=C for clamp fixing, F for fork, H for hole fixing to outgoing device.
Available to accomodate device of frame size up to 105.5 mm. 110 mm may be available.
Longer units may be available on request.
Dimensions of VTxx/35/2.5 see here
|
Incoming terminals are at Nova standard of 35 mm c/c.
Other configurations are available on request. These include:
- variations in the type (C, F or H) of outgoing ways,
- mixed configuration i.e. to accommodate a combination of devices - double pole, single pole, etc.
- double ended unit to accept dual incomers.
|