| BM08/30/8HR |
A Bloc 800A multipole busbar unit.
This unit will accommodate 8 no. 4 Pole 160AF mccb's with connections at 30 mm c/c.
Outgoing terminals are a hole type (H) in this picture, but can be made to suit devices requiring a solid terminal (suffix C) or with a fork (suffix F).
The incoming terminals will accommodate an interconnection link of up to 35 mm wide.
The red and blue phases are connected to the left and right using the phase connection clamp shown with 2 no. M8 bolts.
The yellow phase interconnection is via the single M10 bolt shown.
The outgoing Neutral terminals are on the right in this photograph, but can be on the left if required.
There are 4 no. incoming Neutral terminals. They are located at each side and at each end of the unit. The connection is via an M8 bolt.
4 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required.
Fixing to the enclosure is via 2 M8 bolts which attach to an embedded connection at the rear of the unit.