The Bloc BM08/35/4CL

BM08/35/4CL

BM08/35/4CL

A Bloc 400A multipole busbar unit.

This unit will accommodate 8 no. 4 Pole 250AF mccb's with connections at 35 mm c/c.

Outgoing terminals are shrouded in this picture, but can be made to suit devices requiring a solid terminal (suffix C) or with a hole (suffix H) or a fork type terminal (suffix F).

The outgoing Neutral is on the left in this photograph. It can be on the right if required.

The incoming terminals will require an interconnection link of up to 35 mm wide.

The red and blue phases are connected to the left and right using the phase connection clamp shown with 2 no. M8 bolts.

The yellow phase interconnection is via the single M10 bolt shown.

There are 4 no. Neutral connections. They are located at each side and at each end of the unit. The connection is via an M8 bolt.

4 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required.

Fixing to the enclosure is via 2 M8 bolts which attach to an embedded connection at the rear of the unit.

For dimensions see here>>

<< Bloc BT models << Home>> Bloc BM models >>