The Bloc BT04/35/8HD

BT04/35/8HD

BT/04/35/8HD

A Bloc 800A triple pole busbar unit with incoming supply at each end.

This unit will accommodate 4 no. 3 Pole 250AF mccb's with connections at 35 mm c/c.

This unit can be made as split or dual supply. Each will look identical to this unit.

Outgoing terminals here show a hole "H" type outgoing terminal but can be made to suit devices requiring a solid terminal (suffix "C") or with a fork type terminal (suffix "F").

The incoming terminals will require an interconnection link of up to 35 mm wide.

The red and blue phases are connected to the left and right using the phase connection clamp shown with 2 no. M8 bolts.

The yellow phase interconnection is via the single M10 bolt shown.

3 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required.

Fixing to the enclosure is via 2 M8 bolts which attach to an embedded connection at the rear of the unit.

This busbar can be made to accommodate more outgoing devices if required.

 

<<Bloc BT models << Home>> more BT specials >>