The Bloc Triple Pole Units | ||
|
A Bloc 400A triple pole busbar unit. This unit will accommodate 6 no. Triple Pole mccb's with connections at 25 mm c/c. Outgoing terminals are shown here with a fork "F" type connection to accommodate an M8 bolt. They can be made to suit devices requiring a solid terminal (suffix C) or with a hole (suffix H). The incoming terminals will require an interconnection of up to 35 mm wide. The red and blue phases are connected to the left and right using a phase connection clamp (supplied) with 2 no. M8 bolts. The yellow phase interconnection is via a single M10 bolt in the hole shown. 3 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required. Fixing to the enclosure is via 2 M8 bolts which attach to an embedded connection at the rear of the unit.
For dimensions of 75.5 mm units see here >>
|