The Bloc Triple Pole Units | ||
|
A Bloc 800A triple pole busbar unit. This unit will accommodate 16 no. Triple Pole mccb's with connections at 25 mm c/c. Outgoing terminals on this unit are "C" type, although they are shrouded in this picture, but can also be made with a fork "F" type connection to accommodate an M8 bolt, or to suit devices requiring a hole (suffix H). The incoming terminals will accommodate an interconnection of up to 35 mm wide. The red and blue phases are connected to the left and right using a phase connection clamp (supplied) with 2 no. M8 bolts. The yellow phase interconnection is via a single M10 bolt. 6 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required. Fixing to the enclosure is via 3 M8 bolts which attach to an embedded connection at the rear of the unit.
For dimensions of 75.5 mm units see here >>
|