| BT18/35/8CG(20) |
A 18 way Bloc 800A triple pole busbar unit.
This unit will accommodate 18 no. 3 Pole mccb's with connections at 35 mm c/c.
Outgoing terminals are solid (type "C") to accommodate a clamp type fixing to the outgoing device in this photograph, but can be made with a hole "H" type outgoing terminal, or to suit devices requiring a fork type terminal (suffix "F").
There will be a gap of 20 mm (suffix G20) between outgoing devices with this busbar.
The incoming terminals will accommodate an interconnection link of up to 35 mm wide.
The red and blue phases are connected to the left and right using the phase connection clamp shown with 2 no. M8 bolts.
The yellow phase interconnection is via the single M10 bolt shown.
12 shrouds are included as standard. Spare shrouds can be supplied as optional extras if required.
Fixing to the enclosure is via 4 M8 bolts which attach to an embedded connection at the rear of the unit.